hardened GENISYS® titanium knives with 30 screws in a reusable pack, coated with Ti-5 titanium carbide (thickness 0.9 mm - extra thick for longer life), sharpened on both sides.

Genisys quality guarantee: the only brand tested according to DIN EN 50636/VDE 0700-107. Impact resistant due to conversion to 1-hole version

Compatible with all Worx Landroid robotic lawnmower models: WR101, WR101SI, WR102SI, WR104SI, WR105SI, WR106SI, WR110MI, WR111MI, WR113MI, WG7 ...,
S450i, S500i, M500, M500B, M800, M800i, M1000i, L2000i, L1500i, M1200i, S 450, S 500 i, M 500, M 500 B, M 800, M 800 i, M 1000 i, L 2000 i, L 1500i M 1200 i

Trust is good, control is better: why quality... Our blade from the East Bavarian Technical University (OTH Amberg-Weiden) is constantly tested.

The new Genisys HQ2019 blades are the only robotic lawnmower blades that are manufactured and tested according to DIN EN 50636/VDE 0700-107.
Breakage: The switch to the 1-hole version has made it safer, as the 2-hole "breakage point" has been eliminated.

These blades are 100% compatible with the original Landroid® Worx® blade and are suitable for all models from

The hardened titanium carbide coating significantly extends the service life without increasing stiffness and possible breakage!

All Genisys blades are sharpened on both sides! The number of screws meets the requirements.

Please note that the screws must always be replaced.

It is also recommended to replace the entire set of blades (3 or 5, depending on the model).

When should I replace the blade?

If the lawn is not cut cleanly and evenly, but only "plucked".

You can see this in the white/gray lawns that are getting worse and worse.